Here is a list of all functions, variables, defines, enums, and typedefs with links to the files they belong to:

- s -

• SAFETY_DOOR_ENABLE : driver_opts.h
• SD_DETECT_BIT : pin_bits_masks.h
• SDCARD_ENABLE : driver_opts.h
• SEGMENT_BUFFER_SIZE : config.h
• segment_t : stepper.h
• SERIAL_NO_DATA : stream.h
• SERIAL_STREAM : driver_opts.h
• set_baud_rate_ptr : stream.h
• SET_CHECK_MODE_PROBE_TO_START : config.h
• set_enqueue_rt_handler_ptr : stream.h
• set_periph_pin_description_ptr : hal.h
• set_pin_description_ptr : ioports.h
• set_tool_data_ptr : core_handlers.h
• SetFeedOverrides : gcode.h
• Setting_Action0 : settings.h
• Setting_Action1 : settings.h
• Setting_Action2 : settings.h
• Setting_Action3 : settings.h
• Setting_Action4 : settings.h
• Setting_Action5 : settings.h
• Setting_Action6 : settings.h
• Setting_Action7 : settings.h
• Setting_Action8 : settings.h
• Setting_Action9 : settings.h
• Setting_ActionBase : settings.h
• Setting_ActionPort0 : settings.h
• Setting_ActionPort1 : settings.h
• Setting_ActionPort2 : settings.h
• Setting_ActionPort3 : settings.h
• Setting_ActionPort4 : settings.h
• Setting_ActionPort5 : settings.h
• Setting_ActionPort6 : settings.h
• Setting_ActionPort7 : settings.h
• Setting_ActionPort8 : settings.h
• Setting_ActionPort9 : settings.h
• Setting_ActionPortBase : settings.h
• Setting_AdminPassword : settings.h
• Setting_Arc_FailTimeout : settings.h
• Setting_Arc_HeightPerVolt : settings.h
• Setting_Arc_MaxRetries : settings.h
• Setting_Arc_OkHighVoltage : settings.h
• Setting_Arc_OkLowVoltage : settings.h
• Setting_Arc_OkPort : settings.h
• Setting_Arc_RetryDelay : settings.h
• Setting_Arc_VoltageOffset : settings.h
• Setting_Arc_VoltagePort : settings.h
• Setting_Arc_VoltageScale : settings.h
• Setting_ArcTolerance : settings.h
• Setting_AutoReportInterval : settings.h
• Setting_AxisAcceleration : settings.h
• Setting_AxisAutoSquareOffset : settings.h
• Setting_AxisBacklash : settings.h
• Setting_AxisExtended0 : settings.h
• Setting_AxisExtended1 : settings.h
• Setting_AxisExtended2 : settings.h
• Setting_AxisExtended3 : settings.h
• Setting_AxisExtended4 : settings.h
• Setting_AxisExtended5 : settings.h
• Setting_AxisExtended6 : settings.h
• Setting_AxisExtended7 : settings.h
• Setting_AxisExtended8 : settings.h
• Setting_AxisExtended9 : settings.h
• Setting_AxisHomingFeedRate : settings.h
• Setting_AxisHomingSeekRate : settings.h
• Setting_AxisJerk : settings.h
• Setting_AxisMaxRate : settings.h
• Setting_AxisMaxTravel : settings.h
• Setting_AxisMicroSteps : settings.h
• Setting_AxisSettingsBase : settings.h
• Setting_AxisSettingsBase1 : settings.h
• Setting_AxisSettingsBase2 : settings.h
• Setting_AxisSettingsMax : settings.h
• Setting_AxisSettingsMax1 : settings.h
• Setting_AxisSettingsMax2 : settings.h
• Setting_AxisStepperCurrent : settings.h
• Setting_AxisStepsPerMM : settings.h
• Setting_BlueToothDeviceName : settings.h
• Setting_BlueToothInitOK : settings.h
• Setting_BlueToothServiceName : settings.h
• Setting_BlueToothStateInput : settings.h
• Setting_ButtonAction0 : settings.h
• Setting_ButtonAction1 : settings.h
• Setting_ButtonAction2 : settings.h
• Setting_ButtonAction3 : settings.h
• Setting_ButtonAction4 : settings.h
• Setting_ButtonAction5 : settings.h
• Setting_ButtonAction6 : settings.h
• Setting_ButtonAction7 : settings.h
• Setting_ButtonAction8 : settings.h
• Setting_ButtonAction9 : settings.h
• Setting_ButtonActionBase : settings.h
• Setting_CANbus_BaudRate : settings.h
• setting_changed_ptr : settings.h
• Setting_ControlInvertMask : settings.h
• Setting_ControlPullUpDisableMask : settings.h
• Setting_CoolantInvertMask : settings.h
• Setting_CoolantOnDelay : settings.h
• setting_datatype_t : settings.h
• setting_datatype_to_external() : settings.c , settings.h
• setting_detail_t : settings.h
• setting_details_t : settings.h
• Setting_DirInvertMask : settings.h
• Setting_DisableG92Persistence : settings.h
• Setting_DoorCoolantOnDelay : settings.h
• Setting_DoorOptions : settings.h
• Setting_DoorSpindleOnDelay : settings.h
• Setting_DSTActive : settings.h
• Setting_DualAxisLengthFailMax : settings.h
• Setting_DualAxisLengthFailMin : settings.h
• Setting_DualAxisLengthFailPercent : settings.h
• Setting_EnableLegacyRTCommands : settings.h
• Setting_EnableToolPersistence : settings.h
• Setting_EncoderCPD : plugins.h
• Setting_EncoderCPDBase : settings.h
• Setting_EncoderCPR : plugins.h
• Setting_EncoderCPRBase : settings.h
• Setting_EncoderDblClickWindow : plugins.h
• Setting_EncoderDblClickWindowBase : settings.h
• Setting_EncoderMode : plugins.h
• Setting_EncoderModeBase : settings.h
• Setting_EncoderSettingsBase : settings.h
• Setting_EncoderSettingsMax : settings.h
• Setting_EncoderSpindle : settings.h
• Setting_Fan0OffDelay : settings.h
• Setting_FanPort0 : settings.h
• Setting_FanPort1 : settings.h
• Setting_FanPort2 : settings.h
• Setting_FanPort3 : settings.h
• Setting_FanToSpindleLink : settings.h
• Setting_ForceInitAlarm : settings.h
• Setting_FSOptions : settings.h
• Setting_FtpPort : settings.h
• Setting_FtpPort2 : settings.h
• Setting_FtpPort3 : settings.h
• Setting_G73Retract : settings.h
• Setting_GangedDirInvertMask : settings.h
• Setting_Gateway : settings.h
• Setting_Gateway2 : settings.h
• Setting_Gateway3 : settings.h
• setting_get_description() : settings.c , settings.h
• setting_get_details() : settings.c , settings.h
• setting_get_float_ptr : settings.h
• setting_get_float_value() : settings.c , settings.h
• setting_get_group_details() : settings.c , settings.h
• setting_get_int_ptr : settings.h
• setting_get_int_value() : settings.c , settings.h
• setting_get_string_ptr : settings.h
• setting_get_value() : settings.c , settings.h
• setting_group_detail_t : settings.h
• setting_group_t : settings.h
• Setting_HardLimitsEnable : settings.h
• Setting_HoldActions : settings.h
• Setting_HomePinsInvertMask : settings.h
• Setting_HomingCycle_1 : settings.h
• Setting_HomingCycle_2 : settings.h
• Setting_HomingCycle_3 : settings.h
• Setting_HomingCycle_4 : settings.h
• Setting_HomingCycle_5 : settings.h
• Setting_HomingCycle_6 : settings.h
• Setting_HomingDebounceDelay : settings.h
• Setting_HomingDirMask : settings.h
• Setting_HomingEnable : settings.h
• Setting_HomingFeedRate : settings.h
• Setting_HomingLocateCycles : settings.h
• Setting_HomingPulloff : settings.h
• Setting_HomingSeekRate : settings.h
• Setting_Hostname : settings.h
• Setting_Hostname2 : settings.h
• Setting_Hostname3 : settings.h
• Setting_HttpPort : settings.h
• Setting_HttpPort2 : settings.h
• Setting_HttpPort3 : settings.h
• setting_id_t : settings.h
• Setting_InvertProbePin : settings.h
• Setting_InvertStepperEnable : settings.h
• Setting_IpAddress : settings.h
• Setting_IpAddress2 : settings.h
• Setting_IpAddress3 : settings.h
• Setting_IpMode : settings.h
• Setting_IpMode2 : settings.h
• Setting_IpMode3 : settings.h
• setting_is_integer() : settings.c , settings.h
• setting_is_list() : settings.c , settings.h
• Setting_IsExpanded : settings.h
• Setting_IsExpandedFn : settings.h
• Setting_IsExtended : settings.h
• Setting_IsExtendedFn : settings.h
• Setting_IsLegacy : settings.h
• Setting_IsLegacyFn : settings.h
• Setting_JogFastDistance : settings.h
• Setting_JogFastSpeed : settings.h
• Setting_JogSlowDistance : settings.h
• Setting_JogSlowSpeed : settings.h
• Setting_JogSoftLimited : settings.h
• Setting_JogStepDistance : settings.h
• Setting_JogStepSpeed : settings.h
• Setting_JunctionDeviation : settings.h
• Setting_Kinematics0 : settings.h
• Setting_Kinematics1 : settings.h
• Setting_Kinematics2 : settings.h
• Setting_Kinematics3 : settings.h
• Setting_Kinematics4 : settings.h
• Setting_Kinematics5 : settings.h
• Setting_Kinematics6 : settings.h
• Setting_Kinematics7 : settings.h
• Setting_Kinematics8 : settings.h
• Setting_Kinematics9 : settings.h
• Setting_LaserCoolantGain : settings.h
• Setting_LaserCoolantMaxTemp : settings.h
• Setting_LaserCoolantMinTemp : settings.h
• Setting_LaserCoolantOffDelay : settings.h
• Setting_LaserCoolantOffset : settings.h
• Setting_LaserCoolantOkPort : settings.h
• Setting_LaserCoolantOnDelay : settings.h
• Setting_LaserCoolantTempPort : settings.h
• Setting_LimitPinsInvertMask : settings.h
• Setting_LimitPullUpDisableMask : settings.h
• Setting_LinearSpindle1Piece1 : settings.h
• Setting_LinearSpindle1Piece2 : settings.h
• Setting_LinearSpindle1Piece3 : settings.h
• Setting_LinearSpindle1Piece4 : settings.h
• Setting_LinearSpindlePiece1 : settings.h
• Setting_LinearSpindlePiece2 : settings.h
• Setting_LinearSpindlePiece3 : settings.h
• Setting_LinearSpindlePiece4 : settings.h
• Setting_Macro0 : settings.h
• Setting_Macro1 : settings.h
• Setting_Macro2 : settings.h
• Setting_Macro3 : settings.h
• Setting_Macro4 : settings.h
• Setting_Macro5 : settings.h
• Setting_Macro6 : settings.h
• Setting_Macro7 : settings.h
• Setting_Macro8 : settings.h
• Setting_Macro9 : settings.h
• Setting_MacroATC_Options : settings.h
• Setting_MacroBase : settings.h
• Setting_MacroPort0 : settings.h
• Setting_MacroPort1 : settings.h
• Setting_MacroPort2 : settings.h
• Setting_MacroPort3 : settings.h
• Setting_MacroPort4 : settings.h
• Setting_MacroPort5 : settings.h
• Setting_MacroPort6 : settings.h
• Setting_MacroPort7 : settings.h
• Setting_MacroPort8 : settings.h
• Setting_MacroPort9 : settings.h
• Setting_MacroPortBase : settings.h
• Setting_ModbusId : plugins.h
• Setting_ModbusIdBase : settings.h
• Setting_ModbusIpAddress : plugins.h
• Setting_ModbusIpAddressBase : settings.h
• Setting_ModbusPort : plugins.h
• Setting_ModbusPortBase : settings.h
• Setting_ModbusTCPBase : settings.h
• Setting_ModbusTCPMax : settings.h
• Setting_Mode : settings.h
• Setting_Mode1 : settings.h
• Setting_MotorFaultsEnable : settings.h
• Setting_MotorFaultsInvert : settings.h
• Setting_MotorWarningsEnable : settings.h
• Setting_MotorWarningsInvert : settings.h
• Setting_MQTTBrokerIpAddress : settings.h
• Setting_MQTTBrokerPassword : settings.h
• Setting_MQTTBrokerPort : settings.h
• Setting_MQTTBrokerUserName : settings.h
• Setting_NetMask : settings.h
• Setting_NetMask2 : settings.h
• Setting_NetMask3 : settings.h
• Setting_NetworkMAC : settings.h
• Setting_NetworkServices : settings.h
• Setting_NGCDebugOut : settings.h
• Setting_NonCore : settings.h
• Setting_NonCoreFn : settings.h
• Setting_NTPServerURI : settings.h
• Setting_NTPServerURI_2 : settings.h
• Setting_NTPServerURI_3 : settings.h
• Setting_OffsetLock : settings.h
• setting_output_ptr : settings.h
• Setting_Panel_Encoder0_Cpd : settings.h
• Setting_Panel_Encoder0_Mode : settings.h
• Setting_Panel_Encoder1_Cpd : settings.h
• Setting_Panel_Encoder1_Mode : settings.h
• Setting_Panel_Encoder2_Cpd : settings.h
• Setting_Panel_Encoder2_Mode : settings.h
• Setting_Panel_Encoder3_Cpd : settings.h
• Setting_Panel_Encoder3_Mode : settings.h
• Setting_Panel_JogAccelRamp : settings.h
• Setting_Panel_JogDistance_Keypad : settings.h
• Setting_Panel_JogDistance_x1 : settings.h
• Setting_Panel_JogDistance_x10 : settings.h
• Setting_Panel_JogDistance_x100 : settings.h
• Setting_Panel_JogSpeed_Keypad : settings.h
• Setting_Panel_JogSpeed_x1 : settings.h
• Setting_Panel_JogSpeed_x10 : settings.h
• Setting_Panel_JogSpeed_x100 : settings.h
• Setting_Panel_ModbusAddress : settings.h
• Setting_Panel_SettingsMax : settings.h
• Setting_Panel_SpindleSpeed : settings.h
• Setting_Panel_UpdateInterval : settings.h
• Setting_ParkingAxis : settings.h
• Setting_ParkingEnable : settings.h
• Setting_ParkingFastRate : settings.h
• Setting_ParkingPulloutIncrement : settings.h
• Setting_ParkingPulloutRate : settings.h
• Setting_ParkingTarget : settings.h
• Setting_PlannerBlocks : settings.h
• Setting_PositionDeadband : settings.h
• Setting_PositionDGain : settings.h
• Setting_PositionDMaxError : settings.h
• Setting_PositionIGain : settings.h
• Setting_PositionIMaxError : settings.h
• Setting_PositionMaxError : settings.h
• Setting_PositionPGain : settings.h
• Setting_ProbePullUpDisable : settings.h
• Setting_ProbingFlags : settings.h
• Setting_PulseDelayMicroseconds : settings.h
• Setting_PulseMicroseconds : settings.h
• Setting_PWMFreq : settings.h
• Setting_PWMFreq1 : settings.h
• Setting_PWMMaxValue : settings.h
• Setting_PWMMaxValue1 : settings.h
• Setting_PWMMinValue : settings.h
• Setting_PWMMinValue1 : settings.h
• Setting_PWMOffValue : settings.h
• Setting_PWMOffValue1 : settings.h
• Setting_RelayPortProbe2 : settings.h
• Setting_RelayPortToolsetter : settings.h
• setting_remove_elements() : settings.c , settings.h
• Setting_ReportInches : settings.h
• Setting_Reserved672 : settings.h
• Setting_ResetActions : settings.h
• Setting_RestoreOverrides : settings.h
• Setting_RGB_StripLengt0 : settings.h
• Setting_RGB_StripLengt1 : settings.h
• Setting_RotaryWrap : settings.h
• Setting_RpmMax : settings.h
• Setting_RpmMax1 : settings.h
• Setting_RpmMin : settings.h
• Setting_RpmMin1 : settings.h
• setting_set_float_ptr : settings.h
• setting_set_int_ptr : settings.h
• setting_set_string_ptr : settings.h
• Setting_SettingsAll : settings.h
• Setting_SettingsMax : settings.h
• Setting_SleepEnable : settings.h
• Setting_SoftLimitsEnable : settings.h
• Setting_Spindle_DirPort : settings.h
• Setting_Spindle_OnPort : settings.h
• Setting_Spindle_PWMPort : settings.h
• Setting_SpindleAtSpeedTolerance : settings.h
• Setting_SpindleDeadband : settings.h
• Setting_SpindleDGain : settings.h
• Setting_SpindleDMaxError : settings.h
• Setting_SpindleEnable0 : settings.h
• Setting_SpindleEnable1 : settings.h
• Setting_SpindleEnable2 : settings.h
• Setting_SpindleEnable3 : settings.h
• Setting_SpindleEnable4 : settings.h
• Setting_SpindleEnable5 : settings.h
• Setting_SpindleEnable6 : settings.h
• Setting_SpindleEnable7 : settings.h
• Setting_SpindleEnableBase : settings.h
• Setting_SpindleIGain : settings.h
• Setting_SpindleIMaxError : settings.h
• Setting_SpindleInvertMask : settings.h
• Setting_SpindleInvertMask1 : settings.h
• Setting_SpindleMaxError : settings.h
• Setting_SpindleOffDelay : settings.h
• Setting_SpindleOffsetX : settings.h
• Setting_SpindleOffsetY : settings.h
• Setting_SpindleOnDelay : settings.h
• Setting_SpindlePGain : settings.h
• Setting_SpindlePPR : settings.h
• Setting_SpindlePWMBehaviour : settings.h
• Setting_SpindlePWMOptions : settings.h
• Setting_SpindlePWMOptions1 : settings.h
• Setting_SpindleToolStart0 : settings.h
• Setting_SpindleToolStart1 : settings.h
• Setting_SpindleToolStart2 : settings.h
• Setting_SpindleToolStart3 : settings.h
• Setting_SpindleToolStart4 : settings.h
• Setting_SpindleToolStart5 : settings.h
• Setting_SpindleToolStart6 : settings.h
• Setting_SpindleToolStart7 : settings.h
• Setting_SpindleToolStartBase : settings.h
• Setting_SpindleType : settings.h
• Setting_StatusReportMask : settings.h
• Setting_StepInvertMask : settings.h
• Setting_Stepper1 : settings.h
• Setting_Stepper10 : settings.h
• Setting_Stepper11 : settings.h
• Setting_Stepper12 : settings.h
• Setting_Stepper13 : settings.h
• Setting_Stepper14 : settings.h
• Setting_Stepper15 : settings.h
• Setting_Stepper16 : settings.h
• Setting_Stepper17 : settings.h
• Setting_Stepper18 : settings.h
• Setting_Stepper19 : settings.h
• Setting_Stepper2 : settings.h
• Setting_Stepper20 : settings.h
• Setting_Stepper3 : settings.h
• Setting_Stepper4 : settings.h
• Setting_Stepper5 : settings.h
• Setting_Stepper6 : settings.h
• Setting_Stepper7 : settings.h
• Setting_Stepper8 : settings.h
• Setting_Stepper9 : settings.h
• Setting_StepperEnableDelay : settings.h
• Setting_StepperIdleLockTime : settings.h
• Setting_SteppersEnergize : settings.h
• Setting_StepperSpindle_Options : settings.h
• Setting_TelnetPort : settings.h
• Setting_TelnetPort2 : settings.h
• Setting_TelnetPort3 : settings.h
• Setting_THC_CutterDownPort : settings.h
• Setting_THC_CutterUpPort : settings.h
• Setting_THC_Delay : settings.h
• Setting_THC_DGain : settings.h
• Setting_THC_IGain : settings.h
• Setting_THC_Mode : settings.h
• Setting_THC_Options : settings.h
• Setting_THC_PGain : settings.h
• Setting_THC_Threshold : settings.h
• Setting_THC_VADThreshold : settings.h
• Setting_THC_VoidOverride : settings.h
• Setting_Timezone : settings.h
• Setting_TimeZoneOffset : settings.h
• Setting_ToolChangeFeedRate : settings.h
• Setting_ToolChangeMode : settings.h
• Setting_ToolChangeOptions : settings.h
• Setting_ToolChangeProbingDistance : settings.h
• Setting_ToolChangePulloffRate : settings.h
• Setting_ToolChangeSeekRate : settings.h
• Setting_TrinamicDriver : settings.h
• Setting_TrinamicHoming : settings.h
• setting_type_t : settings.h
• Setting_UnlockAfterEStop : settings.h
• Setting_UserDefined_0 : settings.h
• Setting_UserDefined_1 : settings.h
• Setting_UserDefined_2 : settings.h
• Setting_UserDefined_3 : settings.h
• Setting_UserDefined_4 : settings.h
• Setting_UserDefined_5 : settings.h
• Setting_UserDefined_6 : settings.h
• Setting_UserDefined_7 : settings.h
• Setting_UserDefined_8 : settings.h
• Setting_UserDefined_9 : settings.h
• Setting_UserPassword : settings.h
• setting_validate() : settings.c
• setting_validate_me() : settings.c
• Setting_VFD_10 : settings.h
• Setting_VFD_11 : settings.h
• Setting_VFD_12 : settings.h
• Setting_VFD_13 : settings.h
• Setting_VFD_14 : settings.h
• Setting_VFD_15 : settings.h
• Setting_VFD_16 : settings.h
• Setting_VFD_17 : settings.h
• Setting_VFD_18 : settings.h
• Setting_VFD_19 : settings.h
• Setting_VFD_20 : settings.h
• Setting_VFD_21 : settings.h
• Setting_VFD_ModbusAddress : settings.h
• Setting_VFD_ModbusAddress0 : settings.h
• Setting_VFD_ModbusAddress1 : settings.h
• Setting_VFD_ModbusAddress2 : settings.h
• Setting_VFD_ModbusAddress3 : settings.h
• Setting_VFD_RPM_Hz : settings.h
• Setting_WebSocketPort : settings.h
• Setting_WebSocketPort2 : settings.h
• Setting_WebSocketPort3 : settings.h
• Setting_WebUiAutoReportInterval : settings.h
• Setting_WebUiTimeout : settings.h
• Setting_Wifi_AP_BSSID : settings.h
• Setting_Wifi_AP_Channel : settings.h
• Setting_Wifi_AP_Country : settings.h
• Setting_WiFi_AP_Password : settings.h
• Setting_WiFi_AP_SSID : settings.h
• Setting_WiFi_STA_Password : settings.h
• Setting_WiFi_STA_SSID : settings.h
• Setting_WifiMode : settings.h
• settings : settings.c , settings.h
• settings_add_spindle_type() : settings.c , settings.h
• settings_all : settings.c , settings.h
• settings_changed_ptr : settings.h
• settings_clear() : settings.c , settings.h
• settings_dirty : nvs_buffer.c , nvs_buffer.h
• settings_format_t : report.h
• settings_get_axis_base() : settings.c , settings.h
• settings_get_details() : settings.c , settings.h
• settings_get_homing_source() : settings.h
• SETTINGS_HARD_RESET_REQUIRED : settings.h
• settings_init() : settings.c , settings.h
• Settings_IoPort_InvertIn : settings.h
• Settings_IoPort_InvertOut : settings.h
• Settings_IoPort_OD_Enable : settings.h
• Settings_IoPort_Pullup_Disable : settings.h
• settings_is_group_available() : settings.c , settings.h
• settings_iterator() : settings.c , settings.h
• Settings_ModBus_BaudRate : settings.h
• Settings_ModBus_RXTimeout : settings.h
• settings_normalize_group() : settings.c , settings.h
• settings_override_acceleration() : settings.c , settings.h
• settings_read_build_info() : settings.c , settings.h
• settings_read_coord_data() : settings.c , settings.h
• settings_read_startup_line() : settings.c , settings.h
• settings_register() : settings.c , settings.h
• settings_restore() : settings.c , settings.h
• SETTINGS_RESTORE_BUILD_INFO : config.h
• SETTINGS_RESTORE_DEFAULTS : config.h
• SETTINGS_RESTORE_DRIVER_PARAMETERS : config.h
• SETTINGS_RESTORE_PARAMETERS : config.h
• SETTINGS_RESTORE_STARTUP_LINES : config.h
• Settings_RotaryAxes : settings.h
• settings_store_setting() : settings.c , settings.h
• SETTINGS_VERSION : settings.h
• settings_write_build_info() : settings.c , settings.h
• settings_write_coord_data() : settings.c , settings.h
• settings_write_global() : settings.c , settings.h
• settings_write_startup_line() : settings.c , settings.h
• SettingsFormat_Grbl : report.h
• SettingsFormat_grblHAL : report.h
• SettingsFormat_HumanReadable : report.h
• SettingsFormat_MachineReadable : report.h
• SIN120 : nuts_bolts.h
• SIN30 : nuts_bolts.h
• SINGLE_BLOCK_ENABLE : driver_opts.h
• sleep_check() : sleep.c , sleep.h
• SLEEP_DURATION : config.h
• SOME_LARGE_VALUE : nuts_bolts.h
• SP0 : driver_opts2.h
• SP1 : driver_opts2.h
• SP2 : driver_opts2.h
• SPI_ENABLE : driver_opts.h
• SPI_IRQ_BIT : pin_bits_masks.h
• SPINDLE0_ENABLE : driver_opts.h
• SPINDLE1_ENABLE : driver_opts.h
• SPINDLE2_ENABLE : driver_opts.h
• SPINDLE3_ENABLE : driver_opts.h
• spindle_add_null() : spindle_control.c , spindle_control.h
• SPINDLE_ALL : spindle_control.h
• spindle_all_off() : spindle_control.c , spindle_control.h
• SPINDLE_ALL_VFD : spindle_control.h
• spindle_bind_encoder() : spindle_control.c , spindle_control.h
• spindle_check_state() : spindle_control.c , spindle_control.h
• spindle_config_ptr : spindle_control.h
• spindle_data_request_t : spindle_control.h
• SPINDLE_DIR : driver_opts.h
• SPINDLE_ENA : driver_opts.h
• spindle_enable() : spindle_control.c , spindle_control.h
• SPINDLE_ENABLE : driver_opts.h
• SPINDLE_ENCODER_ENABLE : driver_opts.h
• spindle_enumerate_callback_ptr : spindle_control.h
• spindle_enumerate_spindles() : spindle_control.c , spindle_control.h
• spindle_get() : spindle_control.c , spindle_control.h
• spindle_get_caps() : spindle_control.c , spindle_control.h
• spindle_get_count() : spindle_control.c , spindle_control.h
• spindle_get_data_ptr : spindle_control.h
• spindle_get_default() : spindle_control.c , spindle_control.h
• spindle_get_hal() : spindle_control.c , spindle_control.h
• spindle_get_id() : spindle_control.c , spindle_control.h
• spindle_get_name() : spindle_control.c , spindle_control.h
• spindle_get_pwm_ptr : spindle_control.h
• spindle_get_state_ptr : spindle_control.h
• SPINDLE_GS20 : spindle_control.h
• SPINDLE_H100 : spindle_control.h
• spindle_hal_t : spindle_control.h
• SPINDLE_HUANYANG1 : spindle_control.h
• SPINDLE_HUANYANG2 : spindle_control.h
• spindle_id_t : spindle_control.h
• SPINDLE_INDEX_BIT : pin_bits_masks.h
• spindle_is_enabled() : spindle_control.c , spindle_control.h
• spindle_is_on() : spindle_control.c , spindle_control.h
• SPINDLE_MODVFD : spindle_control.h
• SPINDLE_MY_SPINDLE : spindle_control.h
• SPINDLE_NONE : spindle_control.h
• SPINDLE_NOWFOREVER : spindle_control.h
• SPINDLE_NPWM_PIECES : config.h
• spindle_num_t : spindle_control.h
• SPINDLE_ONOFF0 : spindle_control.h
• SPINDLE_ONOFF0_DIR : spindle_control.h
• SPINDLE_ONOFF1 : spindle_control.h
• SPINDLE_ONOFF1_DIR : spindle_control.h
• SPINDLE_OVERRIDE_COARSE_INCREMENT : grbl.h
• SPINDLE_OVERRIDE_FINE_INCREMENT : grbl.h
• spindle_param_t : spindle_control.h
• spindle_precompute_pwm_values() : spindle_control.c , spindle_control.h
• spindle_ptrs_t : spindle_control.h
• SPINDLE_PULSE_BIT : pin_bits_masks.h
• spindle_pulse_on_ptr : spindle_control.h
• SPINDLE_PWM : driver_opts.h
• SPINDLE_PWM0 : spindle_control.h
• SPINDLE_PWM0_CLONE : spindle_control.h
• SPINDLE_PWM0_NODIR : spindle_control.h
• SPINDLE_PWM1 : spindle_control.h
• SPINDLE_PWM1_NODIR : spindle_control.h
• SPINDLE_PWM2 : spindle_control.h
• SPINDLE_PWM2_NODIR : spindle_control.h
• spindle_pwm_t : spindle_control.h
• spindle_register() : spindle_control.c , spindle_control.h
• spindle_reset_data_ptr : spindle_control.h
• spindle_restore() : spindle_control.c , spindle_control.h
• spindle_rpm_mode_t : gcode.h
• spindle_select() : spindle_control.c , spindle_control.h
• Spindle_Select : gcode.h
• spindle_set_at_speed_range() : spindle_control.c , spindle_control.h
• spindle_set_override() : spindle_control.c , spindle_control.h
• spindle_set_rpm() : spindle_control.c , spindle_control.h
• spindle_set_state() : spindle_control.c , spindle_control.h
• spindle_set_state_ptr : spindle_control.h
• spindle_set_state_synced() : spindle_control.c , spindle_control.h
• SPINDLE_SOLENOID : spindle_control.h
• SPINDLE_STEPPER : spindle_control.h
• SPINDLE_SYNC_ENABLE : config.h
• spindle_type_t : spindle_control.h
• spindle_update_caps() : spindle_control.c , spindle_control.h
• spindle_update_pwm_ptr : spindle_control.h
• spindle_update_rpm_ptr : spindle_control.h
• spindle_validate_at_speed : spindle_control.h
• SPINDLE_YL620A : spindle_control.h
• SpindleData_AngularPosition : spindle_control.h
• SpindleData_AtSpeed : spindle_control.h
• SpindleData_Counters : spindle_control.h
• SpindleData_RPM : spindle_control.h
• SpindleHAL_Active : spindle_control.h
• SpindleHAL_Configured : spindle_control.h
• SpindleHAL_Raw : spindle_control.h
• SpindleSpeedMode_CSS : gcode.h
• SpindleSpeedMode_RPM : gcode.h
• SpindleType_Basic : spindle_control.h
• SpindleType_Null : spindle_control.h
• SpindleType_PWM : spindle_control.h
• SpindleType_Solenoid : spindle_control.h
• SpindleType_Stepper : spindle_control.h
• SpindleType_VFD : spindle_control.h
• SQRT3 : nuts_bolts.h
• squaring_mode_t : stepper.h
• SquaringMode_A : stepper.h
• SquaringMode_B : stepper.h
• SquaringMode_Both : stepper.h
• SSDP_ENABLE : driver_opts.h
• ssid_t : plugins.h
• st2_get_position() : stepper2.c , stepper2.h
• st2_get_speed() : stepper2.c , stepper2.h
• st2_motor_bind_spindle() : stepper2.c , stepper2.h
• st2_motor_cruising() : stepper2.c , stepper2.h
• st2_motor_init() : stepper2.c , stepper2.h
• st2_motor_move() : stepper2.c , stepper2.h
• st2_motor_poll() : stepper2.c , stepper2.h
• st2_motor_register_stopped_callback() : stepper2.c , stepper2.h
• st2_motor_run() : stepper2.c , stepper2.h
• st2_motor_running() : stepper2.c , stepper2.h
• st2_motor_set_speed() : stepper2.c , stepper2.h
• st2_motor_stop() : stepper2.c , stepper2.h
• st2_motor_t : stepper2.h
• st2_set_position() : stepper2.c , stepper2.h
• st2_state_t : stepper2.c
• st_block_t : stepper.h
• st_deenergize() : stepper.c
• st_get_offset_id() : stepper.c , stepper.h
• st_get_realtime_rate() : stepper.c , stepper.h
• st_go_idle() : stepper.c , stepper.h
• st_is_stepping() : stepper.c , stepper.h
• st_parking_restore_buffer() : stepper.c , stepper.h
• st_parking_setup_buffer() : stepper.c , stepper.h
• st_prep_buffer() : stepper.c , stepper.h
• st_reset() : stepper.c , stepper.h
• st_rpm_changed() : stepper.c , stepper.h
• st_update_plan_block_parameters() : stepper.c , stepper.h
• st_wake_up() : stepper.c , stepper.h
• STARTLINE_ADDR : nvs_buffer.c
• State_Accel : stepper2.c
• STATE_ALARM : system.h
• STATE_CHECK_MODE : system.h
• STATE_CYCLE : system.h
• State_Decel : stepper2.c
• State_DecelTo : stepper2.c
• state_door_reopened() : state_machine.c , state_machine.h
• STATE_ESTOP : system.h
• state_get() : state_machine.c , state_machine.h
• state_get_substate() : state_machine.c , state_machine.h
• STATE_HOLD : system.h
• STATE_HOMING : system.h
• STATE_IDLE : system.h
• State_Idle : stepper2.c
• STATE_JOG : system.h
• State_Run : stepper2.c
• State_RunInfinite : stepper2.c
• STATE_SAFETY_DOOR : system.h
• state_set() : state_machine.c , state_machine.h
• STATE_SLEEP : system.h
• state_suspend_manager() : state_machine.c , state_machine.h
• STATE_TOOL_CHANGE : system.h
• state_update() : state_machine.c , state_machine.h
• Status_AccessDenied : errors.h
• Status_AuthenticationRequired : errors.h
• Status_BadNumberFormat : errors.h
• Status_BTInitError : errors.h
• Status_CheckDoor : errors.h
• status_code_t : errors.h
• Status_EStop : errors.h
• Status_ExpectedCommandLetter : errors.h
• Status_ExpressionArgumentOutOfRange : errors.h
• Status_ExpressionDivideByZero : errors.h
• Status_ExpressionInvalidArgument : errors.h
• Status_ExpressionInvalidResult : errors.h
• Status_ExpressionSyntaxError : errors.h
• Status_ExpressionUknownOp : errors.h
• Status_FileOpenFailed : errors.h
• Status_FileReadError : errors.h
• Status_FlowControlNotExecutingMacro : errors.h
• Status_FlowControlOutOfMemory : errors.h
• Status_FlowControlStackOverflow : errors.h
• Status_FlowControlSyntaxError : errors.h
• Status_FSDirNotFound : errors.h
• Status_FsFailedOpenDir : errors.h
• Status_FsNotMounted : errors.h
• Status_FsReadOnly : errors.h
• Status_GcodeArcRadiusError : errors.h
• Status_GcodeAxisCommandConflict : errors.h
• Status_GcodeAxisWordsExist : errors.h
• Status_GcodeCommandValueNotInteger : errors.h
• Status_GCodeCoordSystemLocked : errors.h
• Status_GcodeG43DynamicAxisError : errors.h
• Status_GcodeG53InvalidMotionMode : errors.h
• Status_GcodeIllegalPlane : errors.h
• Status_GcodeIllegalToolTableEntry : errors.h
• Status_GcodeInvalidLineNumber : errors.h
• Status_GcodeInvalidRetractPosition : errors.h
• Status_GcodeInvalidTarget : errors.h
• Status_GcodeMaxFeedRateExceeded : errors.h
• Status_GcodeModalGroupViolation : errors.h
• Status_GcodeNoAxisWords : errors.h
• Status_GcodeNoAxisWordsInPlane : errors.h
• Status_GcodeNoOffsetsInPlane : errors.h
• Status_GcodeRPMOutOfRange : errors.h
• Status_GcodeSpindleNotRunning : errors.h
• Status_GcodeToolChangePending : errors.h
• Status_GCodeToolError : errors.h
• Status_GcodeUndefinedFeedRate : errors.h
• Status_GcodeUnsupportedCommand : errors.h
• Status_GcodeUnsupportedCoordSys : errors.h
• Status_GcodeUnusedWords : errors.h
• Status_GcodeValueOutOfRange : errors.h
• Status_GcodeValueWordMissing : errors.h
• Status_GcodeWordRepeated : errors.h
• Status_Handled : errors.h
• Status_HomingDisabled : errors.h
• Status_HomingRequired : errors.h
• Status_IdleError : errors.h
• Status_IllegalHomingConfiguration : errors.h
• Status_InvalidJogCommand : errors.h
• Status_InvalidStatement : errors.h
• Status_LimitsEngaged : errors.h
• Status_LineLengthExceeded : errors.h
• Status_MaxStepRateExceeded : errors.h
• status_message_ptr : core_handlers.h
• Status_MotorFault : errors.h
• Status_NegativeValue : errors.h
• Status_NonPositiveValue : errors.h
• Status_NotAllowedCriticalEvent : errors.h
• Status_OK : errors.h
• Status_Overflow : errors.h
• Status_Reset : errors.h
• Status_SDMountError : errors.h
• Status_SDNotMounted : errors.h
• Status_SelfTestFailed : errors.h
• Status_SettingDisabled : errors.h
• Status_SettingDisabledLaser : errors.h
• Status_SettingReadFail : errors.h
• Status_SettingStepPulseMin : errors.h
• Status_SettingValueOutOfRange : errors.h
• Status_SoftLimitError : errors.h
• Status_StatusMax : errors.h
• Status_SystemGClock : errors.h
• Status_TravelExceeded : errors.h
• Status_UnexpectedDemarcation : errors.h
• Status_Unhandled : errors.h
• Status_UserException : errors.h
• Status_ValueWordConflict : errors.h
• STEP_INJECT_ENABLE : driver_opts.h
• STEP_MASK : motor_pins.h
• Stepper2_InfiniteSteps : stepper2.h
• Stepper2_mm : stepper2.h
• Stepper2_Steps : stepper2.h
• stepper_claim_motor_ptr : hal.h
• stepper_cycles_per_tick_ptr : hal.h
• stepper_disable_motors_ptr : hal.h
• stepper_driver_interrupt_handler() : stepper.h
• stepper_enable_ptr : hal.h
• stepper_get_ganged_ptr : hal.h
• stepper_go_idle_ptr : hal.h
• stepper_init() : stepper.h
• stepper_interrupt_callback_ptr : hal.h
• stepper_output_step_ptr : hal.h
• stepper_pulse_start_ptr : hal.h
• stepper_status_ptr : hal.h
• stepper_t : stepper.h
• stepper_wake_up_ptr : hal.h
• STEPPERS_ENABLE_MASK : motor_pins.h
• STOP_DISABLE_ENABLE : driver_opts.h
• stored_line_t : settings.h
• strappend() : strutils.c , strutils.h
• strcaps() : nuts_bolts.c , nuts_bolts.h
• stream_buffer_all() : stream.c , stream.h
• stream_claim_ptr : stream.h
• stream_connect() : stream.c , stream.h
• stream_connect_instance() : stream.c , stream.h
• stream_connected() : stream.c , stream.h
• stream_connection_t : stream.c
• stream_disconnect() : stream.c , stream.h
• stream_enqueue_realtime_command() : stream.c , stream.h
• stream_enumerate_callback_ptr : stream.h
• stream_enumerate_streams() : stream.c , stream.h
• stream_get_base() : stream.c , stream.h
• stream_get_flags() : stream.c , stream.h
• stream_get_null() : stream.c , stream.h
• stream_is_connected_ptr : stream.h
• stream_is_file() : stream_file.c , stream_file.h
• stream_mpg_check_enable() : stream.c , stream.h
• stream_mpg_enable() : stream.c , stream.h
• stream_mpg_register() : stream.c , stream.h
• stream_mpg_set_mode() : stream.c , stream.h
• stream_null_init() : stream.c , stream.h
• stream_open_instance() : stream.c , stream.h
• stream_passthru_enter() : stream_passthru.c
• stream_passthru_init() : stream_passthru.c , stream_passthru.h
• stream_read_ptr : stream.h
• stream_redirect_close() : stream_file.c , stream_file.h
• stream_redirect_read() : stream_file.c , stream_file.h
• stream_register_streams() : stream.c , stream.h
• stream_rx_suspend() : stream.c , stream.h
• stream_set_description() : stream.c , stream.h
• stream_set_direction_ptr : modbus_rtu.c
• stream_set_type() : stream_file.c , stream_file.h
• stream_tx_blocking() : stream.c , stream.h
• stream_type_t : stream.h
• stream_write_char_ptr : stream.h
• stream_write_n_ptr : stream.h
• stream_write_ptr : stream.h
• StreamType_Bluetooth : stream.h
• StreamType_File : stream.h
• StreamType_MPG : stream.h
• StreamType_Null : stream.h
• StreamType_Redirected : stream.h
• StreamType_SDCard : stream.h
• StreamType_Serial : stream.h
• StreamType_Telnet : stream.h
• StreamType_WebSocket : stream.h
• strgetentry() : strutils.c , strutils.h
• stristr() : strutils.c , strutils.h
• STRLEN_COORDVALUE : nuts_bolts.h
• strlookup() : strutils.c , strutils.h
• strnistr() : strutils.c , strutils.h
• strnumentries() : strutils.c , strutils.h
• strtointernetdt() : strutils.c , strutils.h
• strtoisodt() : strutils.c , strutils.h
• strtotime() : strutils.c , strutils.h
• suspend_read_ptr : stream.h
• swap_pins_ptr : ioports.h
• sync_position : gcode.h
• sys : grbllib.c , system.h
• sys_command_ptr : system.h
• sys_commands_t : system.h
• sys_help_ptr : system.h
• sys_state_t : system.h
• system_add_rt_report() : system.c , system.h
• system_clear_exec_alarm : system.h
• system_clear_exec_state_flag : system.h
• system_clear_exec_states : system.h
• system_clear_tlo_reference() : system.c , system.h
• system_command_help() : system.c , system.h
• system_convert_array_steps_to_mpos() : system.c , system.h
• system_execute_line() : system.c , system.h
• system_execute_startup() : system.c , system.h
• system_flag_wco_change() : system.c , system.h
• system_get_rt_report_flags() : system.c , system.h
• system_init_switches() : system.c , system.h
• system_output_help() : system.c , system.h
• system_raise_alarm() : system.c , system.h
• system_register_commands() : system.c , system.h
• system_set_exec_alarm : system.h
• system_set_exec_state_flag : system.h
• system_state_t : system.h
• system_t : system.h
• system_xy_at_fixture() : system.c , system.h
• SystemState_Alarm : system.h
• SystemState_CheckMode : system.h
• SystemState_Cycle : system.h
• SystemState_DoorOpen : system.h
• SystemState_EStop : system.h
• SystemState_Hold : system.h
• SystemState_Homing : system.h
• SystemState_Idle : system.h
• SystemState_Jog : system.h
• SystemState_Sleep : system.h
• SystemState_ToolChange : system.h
• SystemState_Undefined : system.h